 |
||||
 |
|
|||
| Home | Products | Shipping Info | Refund & Exchange Policy | Warranty Policy | Contact Us | ||||
 |
|
|
||
Categories: 58
Prices: Canadian Dollars
Motorola Unlock Code Instructions
How to Enter Unlock Codes For ANY Motorola Cellphone
How to enter your unlock code: Remove your working simcard and insert the simcard of a different provider, and when prompted for a subsidy password, enter the code above.
What to do if - "Contact Service Provider", "Tampert Alter", "Wait before enter special Code" message is displayed: If after inserting a simcard from a different provider you notice the message "contact service provider" or any of the messages above, you will need to leave your phone on, at that "contact service provider" screen, for 1-3 hours. Just let it sit on the screen and dont touch any buttons during that time. It will then switch to something like "enter subsidy password", and you can then enter your code.
Model : Motorola L6i & L7i (not L6 and L7 without "i")
1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.
--------------------------------------------------------------------------------
Blackberry BOLD / 8800 8300 Curve / Bold Unlock Code Entry Instructions.
How to Enter Unlock Codes on BlackBerry 8800 8300 Curve:
***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****
1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from unlockmotorolas.com and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked
--------------------------------------------------------------------------------
Blackberry 8100/Pearl
-simcard must be inserted
-Wireless must be off.
How to turn Wireless Mode Off:
1. Scroll to (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.
How to Enter Unlock Codes on BlackBerry 8100 Pearl:
Step Action
1 Insert SIM into device
2 Power phone on and Turn off the radio (Turn Wireless Off option)
3 Select "Options" THEN SELECT ADVANCED OPTIONS
4 Scroll down and select "SIM Card"
5 Type "MEPPD" (please note that you will not see what you type on the screen)
6 Type "MEPP then [ALT BUTTON] then 2" (please note that you will not see what you type on the screen)
7 Enter the Unlock Code
8 Press enter
9 Reboot device. Device is now unlocked.
Alternate Instructions if above fails
1 - While on the home screen, click the “blackberry key” on keyboard, then select “options”.
2 - Choose “Advanced Options”.
3 - Select “Sim Card”
4 - (There is no area to type the following letters, you just type them as instructed. No need to hit keys twice to get a letter either.) Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled ( you will not see text appear on screen
while typing )
5 - Type m e p p 2 to display the dialog box asking for the unlock code
(Press the Alt + 2 key to get the number 2) ( you will not see text
appear on screen while typing )
6 - Input the SIM Unlock code
7 - Press in the trackball in once
Your phone is unlocked
*note: in step 4 or 5, if typing m e p p d or m e p p 2 didn't do anything, try holding down the shift (right of the zero, cap) and pressing meppd
Alternate Instructions if above fails
1 - This can be done with or without sim card.
2 - Go to Options Menu => Advanced Options.
3 - Go to Sim Card Menu
6 - Now Type MEPP2 (Press, and hold the ALT key while typing 2. you will not see anything on screen while typing. ALT key is beside * key, symbol like arrow key.)
7 You will see "Enter Network MEP code (number of attempts left will appear
in brackets).
8. Enter your Network MEP code (unlock code) GsmFather server provided, than press enter.
10. You will see "Code Accepted."
11. You have permanently unlocked your BlackBerry.
12. Power off your BlackBerry, than insert your desired SIM card.
--------------------------------------------------------------------------------
Blackberry 8700 Unlock Code Entry Instructions.
How to Enter Unlock Codes on BlackBerry 8700:
8700c Unlocking Info
***** You must have a SIM card in your phone to complete these steps, Make sure the phone is not displaying the low battery warning! *****
go to settings
go to options
go to advanced options
go to sim card
Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
Does it say Network active? if so your phone is locked
Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
It will say "Enter Network MEP Code, then you type in the unlock code, press in the jog dial to confirm.
Your phone is now unlocked
-------------------------------------------------------------------------------
BlackBerry 7100/7130 Unlock Code Instructions
To Unlock:
1. On the Home screen, click the Tools icon. The Options screen appears.
2. In the tools screen, select the Settings icon.
3. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
4. Type ‘mepp2' to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
5. Input the SIM Unlock code
6. Press in the jog dial once
-------------------------------------------------------------------------------
BlackBerry 5xxx, 6xxx, 7xxx Unlock Code Instructions
5***, 6***, 7*** ( Except for 7100 )
1. go to options
2 scroll to SIM CARD then press jog dial in once to select it
3. Type MEPD (not case sensitive) ( you will not see text appear on screen while typing )
4. Does it say Network active? if so your phone is locked
5. Press and hold the alt key (half moon looking key on the lower left side)
6. as you are holding the alt key type in MEPE (not case sensitive) ( you will not see text appear on screen while typing )
7. type in the unlock code when prompted
8. After entering the code press the jog dial in
9. Your phone is now unlocked
--------------------------------------------------------------------------------
BlackBerry (models not listed above)
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked
--------------------------------------------------------------------------------
Treo Centro, 680,650 600 Unlock Code Entry Instructions.
How to Enter Unlock Codes on Treo 600, 650 and 680 Cell Phones
Remove Treo battery,
Insert incorrect SIM card (Any simcard that the phone does not accept)
Power on Treo-650, 'Sim not allowed' is displayed, click OK
Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion:
*#*#(MEP-CODE)# then press dial (Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software)
For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows:
*#*#12345678# , then press dial
Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by us. Phone will reset and display sim lock removed
Troubleshooting:
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
--------------------------------------------------------------------------------
TREO 750 Unlock Code Entry Instructions
How to Enter Unlock Codes on the Treo 750
1)Insert NON-Cingular Sim card in the phone
2)The phone will ask for the Unlock Code
3)Please use your Stylus and choose the little Keyboard Icon on the bottom middle of the screen
4)Enter the code on the digital keyboard that appears on the screen
5)Then click again on the little keyboard Icon at the bottom middle
6) Click OK
7)Your phone is now unlocked
If you see a message that says "Timeout" just leave the phone on with that screen and the message will dissapear after a while and prompt you for the unlock code again
--------------------------------------------------------------------------------
Sony-Ericsson Unlock Code Entry Instructions
How to Enter Unlock Codes on Sony-Ericsson Cell Phones
Switch ON your phone without Sim card
Press 1 time the left arrow
Press 2 times the button *
Press 1 time the left arrow
'Personalize with MNC2' will appear
You can now enter your unlock code
If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press 'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by 'Down arrow'' to direct the Jogdial down.
--------------------------------------------------------------------------------
LG CU-320 Unlock Code Entry Instructions
1) Power on the Handset.
2) In Idle screen, input the special code "277634#*#".
3)Access the submenu "SIM Test" in Phone Test Mode.
4)Input the special code "2945#*#".
5)Access the submenu "SIM Unlock" which is just activated after the special code
6)Input the 8-digit Unlock code in the "Enter unlock code" input screen.
7)It will be unlocked.
--------------------------------------------------------------------------------
LG U-400 Unlock Code Entry Instructions
1. Insert the Accepted Sim Card.
2. Enter 2945#*88110#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'.
Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.
6. It should give you the message Success.
7. Come back to the main screen and Enter 2945#*88110#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
10. Then press OK
--------------------------------------------------------------------------------
LG CU-400 Unlock Code Entry Instructions
1-Insert non-Cingular SIM card
2-Power on the handset
- phone will display "Invalid SmartChip"
3-In Idle screen, enter 159753#*#
- phone will display "Enter NCK, Remaining 5"
4-Enter the 8 digit SIM Unlock code
5-Select "OK"
- the handset is now successfully unlocked
--------------------------------------------------------------------------------
LG CU-500/TU500 Unlock Code Entry Instructions
How-To Enter Unlock Codes on LG CU500 mobile phones:
Insert a non-Cingular SIM card into your LG CU 500 and power on your phone. When you get the invalid sim-card message/prompt, enter 159753#*# on your phones keypad. On the next screen enter the unlock code provided than press OK.
--------------------------------------------------------------------------------
LG CU-515 Unlock Code Entry Instructions
1.Put a SP-locked sim in the phone, phone say invalid smart chip
2.Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code
Phone will be unlocked!
--------------------------------------------------------------------------------
Roger CU & CE500
1 Insert Rogers SIM card
2 Power on the handset
3 In Idle screen, enter 2945#*7101# Then go to
To Access the Sub Menu:
4 Select Settings
5 Select Security, then SIM Locks
6 Select Network, then Deactivate
7 Enter the 8 digit SIM Unlock Code in the "Enter NCK" input screen
8 Select OK
- the handset is now successfully unlocked
LG TU-720/CU-720/Shine / TU915 Unlock Code Entry Instructions
Model : LG TU720 CU720 And All Shine SERIES
1) Power ON your phone with an accepted SIM card
2) Type *#865625#UNLOCK CODE
3) Press OK
4) Device is now unlocked
--------------------------------------------------------------------------------
LG U8150 Unlock Code Entry Instructions
Model : LG U8150
1 - Switch ON your phone with a NOT Allowed SIM Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.
--------------------------------------------------------------------------------
LG KU990 ViewTV Unlock Code Entry Instructions
1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3.Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.
--------------------------------------------------------------------------------
LG KE970 Shine Unlock Code Entry Instructions
all other LG KE970 Shine:
1.Switch ON your phone with an allowed SIM card
2.Then compose: 2945#*9701#
3. Press CALL.
4. It should you ask you for the code.
--------------------------------------------------------------------------------
LG Unlock Code Entry Instructions - all other models
How to Enter Unlock Codes On LG Mobile Phones
Step Action
1 Insert non-Cingular SIM card
2 Power on the handset
- phone will display "phone restricted"
3 Select "Cancel"
- phone will display "phone restriction code"
4 Enter the SIM Unlock code
5 Select "OK"
- the handset is now successfully unlocked
or
Model : LG F2250
With orange sim card in the start menu tape : 2945#*3311# handset show saved then return to startup screen press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' tape your unlock code and OK.
Model : LG U8110
With a not allowed sim card in your phone enter Pin code then validate tape : 277634#*#, select 'Sim Unlock' menu enter NCK code then validate, your phone is now unlocked.
Model : LG U8210
With a not allowed sim card enter Pin code then validate tape : 277634#*#, now you show test menu choose Sim test menu and tape : 2945#*#, choose Sim Unlock menu, handset show 'Enter NCK' tape code Simlock, then OK.
Model : LG U8150
Model : All Others
Switch ON your phone with an allowed sim card and compose :
2945#*5101# - LG 510w
1945#*5101# - LG 1200 & B1200
2945#*5221# - LG 5200 & 52200
2945#*5301# - LG 5300
2945#*5401# - LG 5400
2945#*70001# - LG 7020
2945#*7101# - LG 7100
2945#*1201# - LG 1100 & 1300
2945#*70001# - LG 7250T & 1100
2945#*2201# - LG C2200
2945#*5301# - LG T5100
2945#*3311# - C3310
Go to 'Menu' and then to 'Settings', select 'Security', to finish select 'Network Provider' and select 'Desactivate' then type your unlock code.
For the next models u must insert the original SIM:
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#
After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.
For next models insert a SIM (not the original SIM):
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK.
-------------------------------------------------------------------------------
Samsung P777, D357 , D807, D407 Unlock Code Entry Instructions
How-To Enter Unlock Codes on a Samsung P777, D357 , D807, D407 mobile phone:
Switch on your phone with a non-accepted SIM card. The phone will ask for 'Password'.
You can now enter your unlcok code. (Even if phone doesn't ask for a password, enter the unlock code)
If 'Insert Correct SIM card' message appears: enter #0111*code#
ZX10, ZX20, A707, X497, C417
Power on without sim, type in #7465625*638*Unlock code#
--------------------------------------------------------------------------------
Samsung ZX10, ZX20, A706, A707, A437, X497, C417, A516 ,A517 Unlock Code Entry Instructions
-Power on without sim, type in #7465625*638*Unlock code#
After unlock if sim card not accept, then -Power on without sim, type in #7465625*638*00000000#
SAMSUNG A127 Unlocking : power on the phone without sim card :
enter #0111*unlock code#
--------------------------------------------------------------------------------
Samsung Z105 & Z107 / J706
Model : Samsung Z105 & Z107
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#
Model : All others Samsung
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.
OR (if phone show "Insert Correct SIM Card")
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#
--------------------------------------------------------------------------------
HP, 8525, 3125, 2125 & all Windows Smartphones, Windows Pocket PC Phones:
Power on with incorrect sim, enter unlock code when prompted
Enter code using onscreen keyboard when unlocking a Pocket PC Phone
--------------------------------------------------------------------------------
Pantech Unlock Code Instructions
1 - Insert non-accepted SIM card
2 - Power on the device
3 - The display will show "Change SIM" and Left Soft Key will be labeled "Unlock"
4 - Press Left Soft Key - A "Password" box will appear on display
5 - Enter Unlock Code
6 - Press "OK" - Center Soft Key
The device will display "rebooting" and then power cycle
7 - The device is now unlocked
or
Power on with incorrect sim, enter unlock code when prompted
Enter code using onscreen keyboard when unlocking a Pocket PC Phone
For C150 model
keep
type in
*#865625#
then will ask for unlock code
retype unlock key
--------------------------------------------------------------------------------
Nokia Unlock Code Instructions
How to Enter Unlock Codes For ANY Nokia Cellphone
-If your Nokia phone gives you a message saying "RESTRICTED", shut down your phone, remove the simcard, power on phone and perform the "CODE ENTRY" instructions below.
-If your phone doesn't say "RESTRICTED", make sure your phone has a simcard from any other provider (other the the one the phone is locked to) and perform the "CODE ENTRY" instructions below.
-If you entered a bad code too many times and get the error "NOT ALLOWED", then your counter is blocked and only a cable method will unlock your phone.
CODE ENTRY INSTRUCTIONS
-You will received a code that looks something like this: #pw+Unlock Code+1#
-Every digit, symbol, number and letter that you receieved must be entered without any spaces. Follow the directions below to find put how to get the # p w and +
P appears after pressing 3 times the button ( * )
W appears after pressing 4 times the button ( * )
+ appears after pressing 2 times the button ( * )
- after entering your unlock code the phone should show "SIM Restriction Off". Youg Nokia is now unlocked.
IF + 1 not work try + 7
like this: #pw+Unlock Code +7#
--------------------------------------------------------------------------------
HP iPaq Series 6315, 6325, 6300, 6515, more:
1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue bootingOR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
*If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried...." You must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
dowload here : http://rapidshare.com/files/93634021/SP29760_6315.zip.html
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM
--------------------------------------------------------------------------------
